liciousmili.blogg.se - Does india ink expire

However, it is important to note that the limiting factor which necessitates a BBE date is propellant loss – normally on account of poor storage or handling conditions which allow decompression of the can. If there are no visible signs of contamination, clumping, etc, a small off-line test using a test piece should give an indication as to whether or not the product is OK to use.īy their very nature, aerosol cans are sealed containers that do not allow contamination to enter. These can be inspected yourself when they are first opened. Once a product enters use, then you can use a process check/comparison product (for example, test pieces/panels) or, alternatively, use the PeneCert Service for external laboratory assessment on penetrants. After that, your routine procedures should ensure no problems are experienced. We recommend carrying out basic quality control tests in-house to ensure acceptable appearance and performance BEFORE adding to in-use material. We would not expect to see any deviation from the manufacturing specifications (AMS and ISO) on unopened products, so the shelf life should be regarded with a degree of common sense. These time frames are derived from understanding the range of normal conditions that our products will be stored in. In general, we give a 5-year shelf life to bulk materials, and a 3-year shelf life to aerosol and aqueous ink concentrates. The BBE date is derived from the date where the product is manufactured. Will I see any degradation of the product’s performance beyond its BBE date?

where they can be checked regularly for any signs of damage.

within the temperature range 10✬ to 30✬ and away from sources of ignition.

in their original containers, which should be kept upright and closed.

It is a guide to what Magnaflux EMEAR recommends, provided that the customer has followed our storage guidelines. The ‘Best Before End’ (BBE) date is an indication of the recommended shelf life of our products. What is meant by the term ‘Best Before End’ (BBE) date? A= January, B = February, C = March, D = April, E = May, F = June, G = July, H = August, J = September, K = October, L = November, M = December. The third character, a letter, represents the month the product was manufactured. The Magnaflux batch numbering system should be interpreted as follows: The first two numbers represent the year the product was manufactured, i.e., “19” = 2019. The date of manufacture is established from the batch number which is located on the product label for bulk materials.

The information quoted above is quoted for Magnaflux products manufactured within Europe.Īll unopened Magnaflux couplants have a shelf life of five (5) years starting from the date of manufacture.

With these items the shelf life is referred to as ‘Best Before End’ date or BBE.

The expiry date is also included on the Batch Inspection Certificates and can be found on both our aerosol can and bulk chemical labels.

The shelf life is a guideline for the time for which Magnaflux has determined product quality during storage.

The shelf life is the period of storage time during which the material is determined to be fully functional.

Note: aerosols, due to slight propellant loss, may not spray as well after two years.

The batch number together, with the ‘Best Before Date’ and ‘Date of Manufacture’, is printed on the underside of the aerosol can. Shelf life (unopened) is 3 years from the date of manufacture. The first two digits represent the year of manufacture and the third and fourth digits give the month of manufacture. The batch number consists of seven digits. Shelf life (unopened) is 5 years from the date of manufacture. They must also be kept dry and protected from sunlight.īulk materials (magnetic particle and penetrant products in bulk, and couplant) In particular, the products must be stored upright in closed containers at temperatures between +10☌ and +30☌.

Our chemical consumable products are guaranteed to perform correctly if stored under suitable conditions and used according to the instructions.